Boxerworks.com

EME have a solid state R/R including all wiring for around the same price as the wiring for the OE set up. They also have a kit which you can fit to bypass the warning light if you stick with the stock system. Gamatronics have a neat, low cost , warning lamp which can be set to show either charging ...

Airheads never really had " Electronic " ignition. They retained the mechanical advance unit below a hall sensor trigger, and the black box was the same one used on some locally built six cylinder family saloon, so little more than a amplifier for the signal from the hall effect sensor. Th...

Both these guys have the factory parts lists on their sites, which will show you what is available from BMW dealers. Most consider that BMWs development of the bikes went the right way and latter bikes are better in most dynamic respects. Mechanically the motors didnt change much, but the transmissi...

Vincents had taper rollers too - and they actually gave you a figure, two thou, to preload them to.

https://www.ebay.com.au/itm/MUFFLER-UNIVERSAL-DUNSTALL-TYPE-DECIBEL-EXH0023-/3609302 I have one of these on my 2 in 1 1000cc R75/7 and it sounds good. Has enough flow to cope, I tried on standard Staintune and it didnt. Fitted right on using the stock bracket and cleared the brake pedal without a de...

On page 2.26 of my Haynes manual drawing 33.7 is annotated - Do not forget spacers or o-rings(where fitted)- before installing rocker assemblies -------

Boring out a cylinder with a cast in Alfin liner for a pressed in liner is not much of and Idea either as the new liner usually has a larger OD than the thickness of the Alfin finned iron sleeve, between the fins. Cheapest way is probably to try and find one secondhand cylinder, and fit the existing...

Will do - I have one of their full floaters on my Funduro , better than OEM quality for, at the time, under $A100!

I fitted a EME harness to my R80 G/S and didnt even realize it was not a BMW PART - quality and function was perfect. It is probably made by the same folks who currently supply BMW - they don't necessarily source spare parts from the OE supplier. But have a good look at the OEM parts lists, on the G...