Boxerworks.com

enigmaT120 wrote: ↑Mon Jan 22, 2018 11:24 am

melville wrote: ↑Sun Jan 21, 2018 9:39 pm Your R80/7 should be LWB.

That's what I was going to say.

Eh err yes of course, Just testing you.

Wondering why pannier frames don't fit

Zombie Master wrote: ↑Tue Dec 12, 2017 3:15 am Wobbly needs some fork gaiters stat.

Agreed. It would be chilly around the stanchions without

"Hens teeth" then

Are these like rocking horse manure? I have seen lots of pannier frames about, but none to fit my R80/7

Hi all Thanks for all the replies and related discussion. Last night I fitted the handlebar M/C kit from Motobins. The M/C itself is Magura and demands the use DOT 4 brake fluid on the reservoir cap so that's what I put in . I'm pretty happy with the result so far; I'm going to check all the connect...

Thanks for your help and advice so far. I have disassembled the m/c and the bore is pitted to perhaps .5mm. I had to knock the piston out from the other end such was the corrosion around the circlip end but that cleaned up ok. In considering options: the handle bar mounted M/C would also require add...

There is no reason to get brake fluid on your paint. That is sloppy work. You have simply misunderstood. The act of dispersing brake fluid does not require conscious activity by a human. The OP's master cylinder is UNDER the fuel tank where it cannot be observed. When those master cylinders leak, t...

Rob wrote: ↑Fri Dec 15, 2017 11:59 am So, dirtsurfer, not going to bite?

I would offer the seller $200 if not for my initial error , It is actually not "up my way" but on the other side of the country : 4,000 kilometers away

The description in the ad says : "Built 1981 in the 35th week engine production line number is 5496 not sure on cc if its 5 or 600ish make me an offer need it gone"

Better informed and none the wiser

Its for sale up my way