Swing arm pivots
Posted: Wed Mar 15, 2017 5:19 pm
'84 R100
I'm reading my books on the procedure to tightening the swing arm. There seems to be a requirement to preload the pins then back off ad re tighten them. This is done before the nuts are torqued down. My books are not giving me the goods or torque specs on this procedure. Got any?
I'm reading my books on the procedure to tightening the swing arm. There seems to be a requirement to preload the pins then back off ad re tighten them. This is done before the nuts are torqued down. My books are not giving me the goods or torque specs on this procedure. Got any?