Bing 64/32/13 vs. 64/32/9

Discuss all things 1970 & later Airheads right here
Post Reply
AndyFitzGibbon
Posts: 7
Joined: Tue Sep 27, 2016 7:50 am

Bing 64/32/13 vs. 64/32/9

Post by AndyFitzGibbon » Wed Jul 19, 2017 8:23 am

Hi all,

The '71 R75/5 that I'm slowly rehabilitating for a friend (sat for ten years) has a mix of carbs on it- the right side is the appropriate 64/32/10, but the left side has a 64/32/13 off a later bike. Both carbs are jetted the same.

Does anyone know if there are any differences in the carburetor body itself between the 64/32/13 and the 64/32/9 that it replaced? I know that they were jetted differently, but am not sure if any internal passageways, ect. we're changed.

I rebuilt the carbs, and the bike runs fine, but not perfect. I have been watching eBay for the correct 64/32/9, but so far all have been pretty ragged looking.

Thanks,
Andy

Post Reply