Anatomy of an OEM BMW plug cap.

Discuss all things 1970 & later Airheads right here.
User avatar
Gibson
Posts: 219
Joined: Tue Apr 19, 2016 11:45 am

Re: Anatomy of an OEM BMW plug cap.

Post by Gibson »

EuroMotoElectrics is a great resource also. Changing wires is a good idea, especially if they are 20 years old or so...
User avatar
SteveD
Posts: 4839
Joined: Tue Aug 03, 2010 3:29 am
Location: Melbourne, Oz.

Re: Anatomy of an OEM BMW plug cap.

Post by SteveD »

Zombie Master wrote: Tue Aug 01, 2017 9:31 pm Anybody got part # or spec for caps and wire?
OEM?
http://www.realoem.com/bmw/enUS/showpar ... Id=12_0749
Cheers, Steve
Victoria, S.E.Oz.


1982 R100RSR100RS supergallery. https://boxerboy81.smugmug.com/R100RS
2006 K1200R.
1994 R1100GS.
Rob
Posts: 3083
Joined: Thu Feb 13, 2014 2:05 am

Re: Anatomy of an OEM BMW plug cap.

Post by Rob »

SteveD wrote: Wed Aug 02, 2017 8:37 pm
Zombie Master wrote: Tue Aug 01, 2017 9:31 pm Anybody got part # or spec for caps and wire?
OEM?
http://www.realoem.com/bmw/enUS/showpar ... Id=12_0749
Part #4 there, is the one OEM part I could not do without.
You strip a short length of the wire, and put a nice, clean solder joint with the wire sticking through the hole on the end, and laid over to one side. Remove and reuse with new wire.
Rob V
User avatar
Zombie Master
Posts: 8813
Joined: Sun Aug 22, 2010 12:21 am
Location: Vancouver Island BC Canada

Re: Anatomy of an OEM BMW plug cap.

Post by Zombie Master »

OEM: I keep learning and forgetting.
Any and all disclaimers may apply
Post Reply