Cheap load test.

Discuss all things 1970 & later Airheads right here.
Post Reply
User avatar
Zombie Master
Posts: 8813
Joined: Sun Aug 22, 2010 12:21 am
Location: Vancouver Island BC Canada

Cheap load test.

Post by Zombie Master »

Starting Load Test
• Adjust voltmeter to DC volts (20 volt range).
• Place voltmeter leads to the battery terminals. (positive to positive and negative to negative)
• Watch the voltmeter as you start your motorcycle.
• If the voltage drops below 9.5 volts, the battery has very low capacity and should be replaced.
Any and all disclaimers may apply
Post Reply