SWB pannier frames

Discuss all things 1970 & later Airheads right here.
User avatar
Airbear
Posts: 2878
Joined: Tue Aug 03, 2010 10:02 am
Location: Oz, lower right hand side, in a bit, just over the lumpy part.

Re: SWB pannier frames

Post by Airbear »

Dirty, maybe you've got SWB frames(?)

It would help if you posted some pics of the arse end of the bike showing how a frame fails to fit.
Charlie
and Brunhilde - 1974 R90/6
Image

Graduate, Wallace and Gromit School of Engineering and Design (Pending)
User avatar
Zombie Master
Posts: 8813
Joined: Sun Aug 22, 2010 12:21 am
Location: Vancouver Island BC Canada

Re: SWB pannier frames

Post by Zombie Master »

Airbear wrote: Sun Jan 21, 2018 9:03 pm
dirtsurfer wrote: Sun Jan 21, 2018 7:52 pm "Hens teeth" then
Ah, you'll just confuse poor ol' Zombie.

Dunno about the pannier frames. Could you get some standard ones and alter them?
Hens have teeth!....well I'll be. :)
Any and all disclaimers may apply
ME 109
Posts: 7290
Joined: Tue Aug 03, 2010 3:00 am
Location: Albury, Australia

Re: SWB pannier frames

Post by ME 109 »

Zombie Master wrote: Mon Jan 22, 2018 7:39 pm

Hens have teeth!....well I'll be. :)
I've often seen them with a cock.
Lord of the Bings
User avatar
Steve in Golden
Posts: 3088
Joined: Tue Aug 03, 2010 4:30 pm
Location: Golden, CO USA

Re: SWB pannier frames

Post by Steve in Golden »

So apparently you have mutant hens down under as well as mutant rabbits. :D
ME 109 wrote: Tue Jan 23, 2018 12:17 am
Zombie Master wrote: Mon Jan 22, 2018 7:39 pm

Hens have teeth!....well I'll be. :)
I've often seen them with a cock.
Rob
Posts: 3083
Joined: Thu Feb 13, 2014 2:05 am

Re: SWB pannier frames

Post by Rob »

Steve in Golden wrote: Wed Jan 24, 2018 2:30 pm So apparently you have mutant hens down under as well as mutant rabbits. :D
ME 109 wrote: Tue Jan 23, 2018 12:17 am
Zombie Master wrote: Mon Jan 22, 2018 7:39 pm

Hens have teeth!....well I'll be. :)
I've often seen them with a cock.
It's because the planet is spinning backwards down under.
Rob V
User avatar
Airbear
Posts: 2878
Joined: Tue Aug 03, 2010 10:02 am
Location: Oz, lower right hand side, in a bit, just over the lumpy part.

Re: SWB pannier frames

Post by Airbear »

You blokes are takin' the piss, aren't you?

That's our job.
Charlie
and Brunhilde - 1974 R90/6
Image

Graduate, Wallace and Gromit School of Engineering and Design (Pending)
User avatar
Zombie Master
Posts: 8813
Joined: Sun Aug 22, 2010 12:21 am
Location: Vancouver Island BC Canada

Re: SWB pannier frames

Post by Zombie Master »

Airbear wrote: Thu Jan 25, 2018 1:24 am You blokes are takin' the piss, aren't you?

That's our job.
So I hear!
Any and all disclaimers may apply
User avatar
Sibbo
Posts: 5637
Joined: Fri Aug 06, 2010 3:18 am
Location: Oz , half way up ,sitting on a wet spot .

Re: SWB pannier frames

Post by Sibbo »

Weld up your own from 1/2'' round bar .... I did.
"You ain't gonna learn what you don't want to know"
The Grateful Dead
User avatar
dirtsurfer
Posts: 61
Joined: Sun Feb 17, 2013 6:17 am
Location: Sydney, Australia

Re: SWB pannier frames

Post by dirtsurfer »

Found the right pannier frames :oops: in one of the many boxes of bits. They fit fine :D
Life is good
User avatar
SteveD
Posts: 4839
Joined: Tue Aug 03, 2010 3:29 am
Location: Melbourne, Oz.

Re: SWB pannier frames

Post by SteveD »

One can never have too many bits. On the other hand, too many boxes creates issues! ;)
Cheers, Steve
Victoria, S.E.Oz.


1982 R100RSR100RS supergallery. https://boxerboy81.smugmug.com/R100RS
2006 K1200R.
1994 R1100GS.
Post Reply