Who fixes bings in Australia

Discuss all things 1970 & later Airheads right here.
User avatar
dirtsurfer
Posts: 61
Joined: Sun Feb 17, 2013 6:17 am
Location: Sydney, Australia

Who fixes bings in Australia

Post by dirtsurfer »

Since getting the /7 registered my attention has moved to the G/S. Some butchering has taken place in the (R) carby . I read in the documents that came with the bike , all those years ago a mechanic noted that he was unable to remove the main jet.
Is there a binguru somewhere I can send my problem to? I have a vague memory of people sending their carbs to a guy in QLD and recommending his work
User avatar
dirtsurfer
Posts: 61
Joined: Sun Feb 17, 2013 6:17 am
Location: Sydney, Australia

Re: Who fixes bings in Australia

Post by dirtsurfer »

I found the guy
User avatar
Zombie Master
Posts: 8813
Joined: Sun Aug 22, 2010 12:21 am
Location: Vancouver Island BC Canada

Re: Who fixes bings in Australia

Post by Zombie Master »

Don't forget "The Lord of the Bings"!
Any and all disclaimers may apply
Beemerboff
Posts: 64
Joined: Thu Feb 08, 2018 12:11 am

Re: Who fixes bings in Australia

Post by Beemerboff »

Who is he?
Any machine shop can mill out a stuck main jet.
Midel in Sydney are one of the few carb shops left standing, but I have only used them for SU parts and advice
User avatar
Airbear
Posts: 2878
Joined: Tue Aug 03, 2010 10:02 am
Location: Oz, lower right hand side, in a bit, just over the lumpy part.

Re: Who fixes bings in Australia

Post by Airbear »

Hey, welcome aboard Beemerboff.
Charlie
and Brunhilde - 1974 R90/6
Image

Graduate, Wallace and Gromit School of Engineering and Design (Pending)
User avatar
SteveD
Posts: 4839
Joined: Tue Aug 03, 2010 3:29 am
Location: Melbourne, Oz.

Re: Who fixes bings in Australia

Post by SteveD »

Cheers, Steve
Victoria, S.E.Oz.


1982 R100RSR100RS supergallery. https://boxerboy81.smugmug.com/R100RS
2006 K1200R.
1994 R1100GS.
User avatar
Airbear
Posts: 2878
Joined: Tue Aug 03, 2010 10:02 am
Location: Oz, lower right hand side, in a bit, just over the lumpy part.

Re: Who fixes bings in Australia

Post by Airbear »

SteveD wrote: Thu Feb 08, 2018 1:39 am https://www.mmmsbmwboxerworks.com.au/
Good link to store. Thanks Steve.
Charlie
and Brunhilde - 1974 R90/6
Image

Graduate, Wallace and Gromit School of Engineering and Design (Pending)
User avatar
Zombie Master
Posts: 8813
Joined: Sun Aug 22, 2010 12:21 am
Location: Vancouver Island BC Canada

Re: Who fixes bings in Australia

Post by Zombie Master »

Looks like a great shop!
Any and all disclaimers may apply
User avatar
dirtsurfer
Posts: 61
Joined: Sun Feb 17, 2013 6:17 am
Location: Sydney, Australia

Re: Who fixes bings in Australia

Post by dirtsurfer »

SteveD wrote: Thu Feb 08, 2018 1:39 am https://www.mmmsbmwboxerworks.com.au/
Yeah thats the bloke I spoke to. I'll be posting my 32/64/305 & 306 up there today
Beemerboff
Posts: 64
Joined: Thu Feb 08, 2018 12:11 am

Re: Who fixes bings in Australia

Post by Beemerboff »

Airbear, I have been here before, off and on, over the past 20 years, but just changed my internet server and the easiest way for me to get things to work was a new registration under a new address.
I am in Adelaide - SteveD will know who I am-----------.
Post Reply