Boxerworks.com

Hello all,

Been away since the updated website went online and the new website is giving me some challenges.
I can't login on the home page. But can login on the forum page.
I don't see a registration option for the home page.

Any help much appreciated,

tagordon

Chuey, The 39mm forks on my R100 Cafe are fine for me, with the mods and adjustments I have made. Billet top clamp is big improvement over the stamped steel stock clamp. Solid clamp ons work great, no need for end weights. Progressive spring with 5/8" pre-load works for my 165lbs. I'd have to c...

Avon Road Rider 90/90 18 Front
Pirelli Sport Demon 120/90 18 Rear
Excellent traction in all conditions and temperatures.
As Blaise mentioned, sticky tires wear faster.

2¢ on the subject of perch gear clamps. My perch wedges are safely stored away, somewhere. I prefer to have the clamps not so firmly tightened down. As my motorcycles occasionally find themselves horizontal. And for me, the common result of instances of motorcycles traveling horizontally vs vertical...

Glad you have no severe injuries.
Wish you a speedy recovery.

Now I would check the connector at the harness. To be sure it's not just a lousey corroded connection.
Follow the wires from the switch to the harness connector and unplug it. Check for corrosion, then short across the harness terminals and see if the light comes on.

jag beat me to it

hudson, you say there is continuity from the wire's end back to the switch. So now check for 12V. Brown is the ground wire, connect that to the ground on your meter or test light. Then check the other two wires individually for 12V when the brake lever(s) are activated. The one that shows 12V when b...

hillco148 wrote:I'm about to get a tuned Y collector pipe this weekend and about to redo the exhaust system.

Here's a pic.

My buddy Have a GS muffler from R100.. Going to see how much i have to hack off..

stay tune..

Mak, where is the collector from? I don't believe I've seen that one before.

Your welcome, Dan.
Glad it helped.

That is a nice triple clamp. Is it stock for this bike? Not an OEM stock clamp. It is a billet aluminium item I got from San Jose BMW Racing Team's CC Products. Here's a link for the clamp: http://www.sjbmw.com/parts.asp#s=store&bid=4&mid=&src=&p=1&pid=33 I modified/upgraded the...