Bleeding Rear Brake on RS driving me crazy!!!!

[ME 109]

You really need to come to Canada and get yourself some real beer.

Hell yeah!

Hey, is Disneyland still open? Always wanted to go there for real.

[buzz]

I went through the same problem recently.

After lots or pumping & bleeding I ended up doing what has been mentioned here.
- Get the bleed nipple as high as possible
- Wedge the rear brake pedal down and leave over night to let any air bubbles move up to the nipple
- Then bleed the system again.

It worked a treat - best the rear brake has been for ages.

In sympathy with the "Bleeding" theme of the thread - now my ''bleeding'' turn indicator light is not working.

[Darryl Flynn]

I went through the same problem recently.

After lots or pumping & bleeding I ended up doing what has been mentioned here.
- Get the bleed nipple as high as possible
- Wedge the rear brake pedal down and leave over night to let any air bubbles move up to the nipple
- Then bleed the system again.

It worked a treat - best the rear brake has been for ages.

In sympathy with the "Bleeding" theme of the thread - now my ''bleeding'' turn indicator light is not working.

BLEEDIN ELL! ( It's a Brit thing )

[Jean]

Buzz...I think the bleeding turn indicator light problem is the bleedin' turn-indicator relay.
It's also expensive.

[Darryl Flynn]

Buzz...I think the bleeding turn indicator light problem is the bleedin' turn-indicator relay.
It's also expensive.

No, IT's BLEEDIN Expensive

[ME 109]

Buzz...I think the bleeding turn indicator light problem is the bleedin' turn-indicator relay.
It's also expensive.

No, IT's BLEEDIN Expensive

Lizzie would say bleedin'

Must spell it correctly.

German Ebay, full set of s/hand relays $20-25

[SteveD]

buzz...if it's the indicator on the dash, check the folded copper connection on the circuit board, where it connects to the globe. It might be cracked. A tiny piece of folded aluminium foil can fix bleedin' problem.

[buzz]

buzz...if it's the indicator on the dash, check the folded copper connection on the circuit board, where it connects to the globe. It might be cracked. A tiny piece of folded aluminium foil can fix bleedin' problem.

Thanks Steve

Unfortunately, the circuit board is full of bleedin' folded aluminium foil

[ME 109]

<$20 from Ebay Germany.

[buzz]

<$20 from Ebay Germany. :

Thanks, but I have my Australian agent on to it - it's easier for me that way & helps him.