5 speed ribbed tranny rebuild

[ME 109]

I've pulled 5th gear off......can't see an X so at least I'm confident which gear to get.
I've decided that I will in fact go for the taller fifth.

Prolly order all the stuff from M'bins tomorrow.
Too many reds now, I'll order too many bits.

[Roy Gavin]

If you had to use a puller to get 5th gear off you might need a new shaft too.

[ME 109]

If you had to use a puller to get 5th gear off you might need a new shaft too.

I did need to use a puller Roy, and use a little heat from my mini propane torch.
I did wonder about having to 'pull' a bearing that was retained by a circlip. Should I call the fire brigade?

[ME 109]

If you had to use a puller to get 5th gear off you might need a new shaft too.

I did need to use a puller Roy, and use a little heat from my mini propane torch.
I did wonder about having to 'pull' a bearing that was retained by a circlip. Should I call the fire brigade?

WHOA! peddle backwards, lucky I didn't call the fire brigade!

It's Sunday morning, 7:45. That's my excuse.

I meant I had to pull the bearing, not the GEAR.

I knew there was more to your smiley face....

[ME 109]

A package arrived today from Motobins which I've yet to open...
I do believe there is a taller 5th in there.
Gotta get this rebuild right.

[Deleted User 287]

Let me know if you want me to fly over and help out.
I usually only make the same mistake once. Twice at the most.

Usually.

[ME 109]

Hey that'd be fun Rob, and then we could go over and see Charlie.

[Deleted User 287]

Oh man, I could muck up the whole island!

[ME 109]

Oops, way big pics.
Right click, click view image.

[Garnet]

That's quite the pile of shinny gears ya got there. Is that tall 5th gear gonna fit in there?