Airhead parts leaving the shelves

new or used motorcycle parts only.
please make sure you read and understand the rules before posting.
Post Reply
KenHawk
Posts: 124
Joined: Sun Aug 08, 2010 8:32 pm

Airhead parts leaving the shelves

Post by KenHawk »

Well, my project bike is finished and I'm clearing the shelves of my accumulated, parts in order to make room for whatever is next. If you need to discuss anything, email me and I'll get you my number but this stuffs gotta go and I'd rather see you have it ,than toss it onto Ebay but thats exactly where it's going to go within a couple or three weeks.


1)Set Rask rear sets with R65 mount plates. Should fit most Airheads with the correct mounts and parts are available. 1) /6 or R100 oil pan. Soda Blasted clean slight damage to two or three fins. $15. 1) Set R90 connecting rods VGC $25, 1) New Bead Rider bead seat for /5, /6, /7, R100. Bought new for $40 sell new for $25, 1) Shoei RF-1000 size XL helmet, worn only one or two hours. (Really!) Metallic silver, clean, no damage, quick release catch added, spare cheek pads new in pkg, stock accessories new in pkg, comes with paperwork and helmet bag, as new. $150, Vintage CC Products Rear Sets. Complete with mounts but may be missing a shaft.. I dunno... Otherwise good condition $150 1) R100 rear disk brake assy including pedal, MC and caliper $60, 1 ) CC Products (?) frame side braces. New $150, $400. R90 heads refurbished 1000 mile ago with all new parts + guide seals. $250. R90 jugs clean, ready for first overbore 1) /6 swing arm, good drive shaft $50, 1) Sq Air-box with internal plumbing $25, 1) 80s starter cover $10, 1) R100 fender brace with fresh powder coat. $25, 1) /6 Center Stand Soda Blasted clean, good mount holes needs a tang and the usual patches. $25, 1) /6 Airbox soda blasted, nice part. $25, 1) /6 front cover. $25, 1) /6 timing chest cover $25 for $40 for both parts. 1) 80s rocker cover soda blasted, not perfect but a nice part once painted $30, 1) 32:11 Drum brake rear drive from 79RS. A very clean part, 90% splines. $250 1pr) As New/Mint Progressive Airhead shocks w. Chrome springs $175. All prices are + shipping and I'm open to reasonable offers. Shipping is extra. Email: mymindsok(at)yahoo.com
Image

If the revolution was televised, Americans would watch "Dancing with the Stars".
KenHawk
Posts: 124
Joined: Sun Aug 08, 2010 8:32 pm

Re: Airhead parts leaving the shelves

Post by KenHawk »

Please note that this ad should have been removed on Sept. 8th of 2010. MAny of these item have been either sold or repriced but since we cannot edit our posts in this section of the forum, please contact me for info.

Thanks

KWH
Image

If the revolution was televised, Americans would watch "Dancing with the Stars".
Deleted User 287

Re: Airhead parts leaving the shelves

Post by Deleted User 287 »

Ken - you could Quote your original ad, and then edit the changes. And delete the [quote] codes!
KenHawk
Posts: 124
Joined: Sun Aug 08, 2010 8:32 pm

Re: Airhead parts leaving the shelves

Post by KenHawk »

Yeah but I want to remove the ad entirely and despite the rules, the management has not done so but has also not provided me with the means of doing so.

Probably one more software issue....
Image

If the revolution was televised, Americans would watch "Dancing with the Stars".
Matt
Posts: 261
Joined: Mon Aug 02, 2010 10:00 pm
Location: Athens, Georgia
Contact:

Re: Airhead parts leaving the shelves

Post by Matt »

Hi Ken, I'm not sure what the problem is. I had set up the Swap Meet to time out and auto delete in 30 days. For whatever reason its not doing that. thanks for bringing it up. This is the first issue in the flea market brought to our attention and we are working on it currently. Your patience is greatly appreciated. thanks,
Matt
Matt Richards
BOXERWORKS
matt@boxerworks.com
lrz
Posts: 342
Joined: Tue Aug 03, 2010 8:01 am

Re: Airhead parts leaving the shelves

Post by lrz »

had you edited your ad after original post date? I had queried @ my centerstand ad exceeding 30 days and the next day rec'd an automated deletion notice via email...
Major Softie
Posts: 8900
Joined: Tue Aug 03, 2010 1:46 pm

Re: Airhead parts leaving the shelves

Post by Major Softie »

Ah, you think editing resets the clock? Could be.
MS - out
david
Posts: 1
Joined: Mon Jun 13, 2011 9:56 pm

Re: Airhead parts leaving the shelves

Post by david »

I am looking for a couple of mirrors for my 1986 r80rt. I just can't see paying a lot for a mirror. So I am going to look a while before I subsitute.
Scot
Posts: 390
Joined: Tue Aug 03, 2010 11:24 am

Re: Airhead parts leaving the shelves

Post by Scot »

david wrote:I am looking for a couple of mirrors for my 1986 r80rt. I just can't see paying a lot for a mirror. So I am going to look a while before I subsitute.

Well, David . . . I guess it depends on your definition of "a lot."

Brand new - $24 - at Re-Scoot.

http://www.re-psycle.com

(614) 837-1160
Post Reply