Boxerworks.com

Posted: **Fri Sep 14, 2012 5:39 am**

Since you are running a GS-type exhaust, I take it you won't be keeping the saddlebags or mounts.
Those will bring you a few hundred (or more) to offset your shock and Y collector. I see they are the most-desirable tumbler-lock type that can be keyed the same as the ignition key.

Posted: **Fri Sep 14, 2012 9:29 am**

That stuffs is already off the bike..

Putting up on ebay hope to recoup some money back.. Mak.

Posted: **Fri Sep 14, 2012 5:17 pm**

hillco148 wrote:I'm about to get a tuned Y collector pipe this weekend and about to redo the exhaust system.

Here's a pic.

My buddy Have a GS muffler from R100.. Going to see how much i have to hack off..

stay tune..

Mak, where is the collector from? I don't believe I've seen that one before.

Posted: **Sun Sep 16, 2012 1:20 pm**

I have to get that info for you..

Here's a few pictures i took this weekend.

Just installed some header heat shield.

Do anyone know if the early R80 steering damper works on 85-87 up R80 model?

Thanks, Mak.

Posted: **Sun Sep 16, 2012 4:15 pm**

You gotta DO SOMETHING about those RT handlebars!!
Turn them upside down????
PS. You stole it!! what's the milage?

Posted: **Sun Sep 16, 2012 10:47 pm**

Jean wrote:You gotta DO SOMETHING about those RT handlebars!!
Turn them upside down????
PS. You stole it!! what's the milage?

Thanks.

Mileage is around 38k.

Man, I know about those bar..

Just picked this up for $40

38mm clip on vintage stuff from the 70's..

We'll see....

Posted: **Sun Sep 16, 2012 11:21 pm**

Oh, THOSE are pretty!!

Posted: **Mon Sep 17, 2012 12:48 am**

Jean wrote:Oh, THOSE are pretty!!

Yes they are, but are they 22mm or 7/8"?

Posted: **Mon Sep 17, 2012 8:57 am**

SteveD wrote:
Jean wrote:Oh, THOSE are pretty!!
Yes they are, but are they 22mm or 7/8"?

Kinda look like 22mm?...

Just confirmed.. 7/8".

Posted: **Mon Sep 17, 2012 9:10 am**

hillco148 wrote:
SteveD wrote:
Jean wrote:Oh, THOSE are pretty!!
Yes they are, but are they 22mm or 7/8"?
Kinda look like 22mm?...

Just confirmed.. 7/8".

http://w6rec.com/duane/bmw/control/index.htm
You need the 22mm unfortunately. The handlebar furniture won't quite fit around the 7/8's set and you chance breaking them as you fasten them on. Try them first though. You never know your luck.

When you remove the stuff from the bars, ensure the perch wedge isn't lost.http://w6rec.com/duane/bmw/perch/index.htm

Boxerworks.com

Newbie Here! 86 R80N Getting Naked in progress..

Re: Newbie Here! 86 R80N Getting Naked in progress..

Re: Newbie Here! 86 R80N Getting Naked in progress..

Re: Newbie Here! 86 R80N Getting Naked in progress..

Re: Newbie Here! 86 R80N Getting Naked in progress..

Re: Newbie Here! 86 R80N Getting Naked in progress..

Re: Newbie Here! 86 R80N Getting Naked in progress..

Re: Newbie Here! 86 R80N Getting Naked in progress..

Re: Newbie Here! 86 R80N Getting Naked in progress..

Re: Newbie Here! 86 R80N Getting Naked in progress..

Re: Newbie Here! 86 R80N Getting Naked in progress..