Re: Options for master cylinder replacement R75/6
Posted: Fri Feb 13, 2015 4:16 am
Cylinder and calliper are spotless. No pitting in bores or on pistons, but some mild surface rust here and there.
Boxerworks.com
Boxerworks Member Forum
https://forum.boxerworks.com/
Options for master cylinder replacement R75/6
Page 2 of 2
Re: Options for master cylinder replacement R75/6
Posted: Fri Feb 13, 2015 6:34 am
So you tore apart the complete system? Smart man.
Re: Options for master cylinder replacement R75/6
Posted: Fri Feb 13, 2015 3:22 pm
If not for impatience, I'd have painted it!
Re: Options for master cylinder replacement R75/6
Posted: Thu Mar 05, 2015 3:12 am
Thinking I might keep on the lookout for a handlebar solution.
This would do the "do", right? I'm just a bit unsure.
http://www.ebay.com/itm/BMW-Airhead-Rig ... e3&vxp=mtr
This would do the "do", right? I'm just a bit unsure.
http://www.ebay.com/itm/BMW-Airhead-Rig ... e3&vxp=mtr
Re: Options for master cylinder replacement R75/6
Posted: Thu Mar 05, 2015 4:23 am
Ask him the MC size. It's on the underneath section. 13,14 or 15mm. I'm unsure what size is best suited to a single disc setup.
The throttle teeth look well worn.
If he has the matching grip, ask him if it can be added to the deal.
Some new stainless hose would add to performance. If the current hose is old oem stuff, then any new hose should add to performance.
The throttle teeth look well worn.
If he has the matching grip, ask him if it can be added to the deal.
Some new stainless hose would add to performance. If the current hose is old oem stuff, then any new hose should add to performance.
Re: Options for master cylinder replacement R75/6
Posted: Thu Mar 05, 2015 5:23 am
It's a 15mm one.