Page 1 of 1
diode board wiring
Posted: Thu Mar 12, 2015 12:08 am
by dickvandevelde
I took my diode board out and forgot which way the wiring goes back together. On the back side there is a cluster of 3 wires, green, red and black. Those I know can only go on one way on the board. Now I have a blue wire left over and I don't know where it fits because there are 2 spade terminals. This is for a 1981 R100 RS. Anyone know which terminal I would have to put the blue wire on? Thanks Dick V.
Re: diode board wiring
Posted: Thu Mar 12, 2015 1:46 am
by Bamboo812
D+ is the blue wire from the regulator:
Re: diode board wiring
Posted: Thu Mar 12, 2015 2:04 am
by dickvandevelde
thanks a lot Bamboo812! Dick V.
Re: diode board wiring
Posted: Thu Mar 12, 2015 2:56 am
by Bamboo812
Easy peazy
Re: diode board wiring
Posted: Thu Mar 12, 2015 3:30 am
by Rob
Bamboo812 wrote:D+ is the blue wire from the regulator:
Photo source:
http://jhau.maliwi.de/mot/r-elec.html
A very good page to bookmark.
Re: diode board wiring
Posted: Sun Mar 15, 2015 9:14 pm
by dickvandevelde
thanks Rob, that's a good site. D.V.