Project completion
Posted: Thu Jul 09, 2015 12:58 am
You may know that I purchased a Suzuki DR650 last winter. I have been in farkle mode and now am finished the main work.
The addition of a pumper carb transformed the engine performance. Bike is a blast now, nothing like the stock machine. I think this project produced a machine that is a great value. I was able to install all the gear without help due to the great resources on line. My new air cooled, carburetor fueled, jam nut tappet adjusted, all road tourer:
See mod list below.
Mods:
Mikuni TM40 pumper carb
DT1 air filter
Magnetic oil plug from PC
FMF Q4 slip on exhaust
Cogent Mohjavi Shock
Cogent Fork Springs and dampers
Acerbis 23Litre tank with locking cap 90 degree in-line filter
Easter Beaver 3 circuit solution (fused wiring harness with relay)
PC Saddleman seat cover
Moto Racks side and rear racks
Dual Star Heated undergrips with gel dual sport grips
Cyclops LED headlight bulb
Pivot Pegs
SW Mototech skid plate
Bark Busters
The addition of a pumper carb transformed the engine performance. Bike is a blast now, nothing like the stock machine. I think this project produced a machine that is a great value. I was able to install all the gear without help due to the great resources on line. My new air cooled, carburetor fueled, jam nut tappet adjusted, all road tourer:
See mod list below.
Mods:
Mikuni TM40 pumper carb
DT1 air filter
Magnetic oil plug from PC
FMF Q4 slip on exhaust
Cogent Mohjavi Shock
Cogent Fork Springs and dampers
Acerbis 23Litre tank with locking cap 90 degree in-line filter
Easter Beaver 3 circuit solution (fused wiring harness with relay)
PC Saddleman seat cover
Moto Racks side and rear racks
Dual Star Heated undergrips with gel dual sport grips
Cyclops LED headlight bulb
Pivot Pegs
SW Mototech skid plate
Bark Busters