Page 1 of 1

Airhead parts suppliers.

Posted: Mon Mar 28, 2016 10:00 pm
by SteveD

Re: Airhead parts suppliers.

Posted: Mon Mar 28, 2016 10:25 pm
by Bamboo812

Re: Airhead parts suppliers.

Posted: Tue Mar 29, 2016 12:33 am
by Rob
A couple of used parts suppliers

Mikey's in Texas http://www.austinmotorscene.com/martind ... ead-mecca/

Re-Psycle in Ohio http://www.re-psycle.com/default.asp


And for things electrical http://www.motoelekt.com/

Special tools http://www.cycleworks.net/

My personal favorite for NGK caps and ignition wire (inexpensive) http://www.mikesxs.net/products-27.html#products

Ted Porters http://www.beemershop.com/Merchant5/mer ... e=AIRHEADS

I hesitate to add this one, because keeping the stock airbox is really best for the engine http://boxermetal.com/
They have a link to this place http://www.bmw2valve.com/

And finally, for the person wanting to build a custom cafe bike http://www.airtech-streamlining.com/vin ... ntage.html

Re: Airhead parts suppliers.

Posted: Tue Mar 29, 2016 12:36 am
by Rob
note that Motorworks does not ship to the U.S. (still?)

Re: Airhead parts suppliers.

Posted: Tue Mar 29, 2016 5:52 am
by malcom
Hi Steve I bought a lot of used parts from " Lamont" in the US on ebay, when restoring my beemer, (good parts, prices & freight cost) do you want to include used part suppliers as well?

cheers mal

Re: Airhead parts suppliers.

Posted: Tue Mar 29, 2016 8:01 am
by SteveD
malcom wrote:Hi Steve I bought a lot of used parts from " Lamont" in the US on ebay, when restoring my beemer, (good parts, prices & freight cost) do you want to include used part suppliers as well?
cheers mal
You betcha!

Re: Airhead parts suppliers.

Posted: Tue Mar 29, 2016 12:35 pm
by jagarra
Here is the best supplier I have found for used BMW parts on e-bay. Starting prices are low, accurate descriptions, prompt shipping.

http://www.ebay.com/usr/lamontsanfurd

His name was mentioned before, I have bought many , many parts from him, always been happy with the transaction.

Re: Airhead parts suppliers.

Posted: Tue Mar 29, 2016 12:43 pm
by Duane Ausherman
If I get the list with all of the reasonable suggestions, I will try to put it on my website............ if I ever get a computer so that I can do it.

Re: Airhead parts suppliers.

Posted: Fri Apr 15, 2016 9:00 pm
by Rob
Bump! (virtual sticky)