Boxerworks.com

Thanks again, Rob.

I'll measure and use the shim if necessary to get a bit more compression and follow your advice on oil pressure testing. Just to be sure, 10-15 psi idle should be about right?

The filter was actually installed with a shim when I bought the bike. I'll measure the depth when I get back to whe workshop. If I'm not mistaken I should be aiming for about 20% compression. At first I was quite worried about the pitting on the edge of the canister. However, like Rob says, I believ...

Thanks for the input Rob. I cleaned off the rust a month ago and applied some WD40 to prevent further corrosion. There's some pitting on the mating surface for the o-ring and inside the canister itself. See pictures below. What do you think? IMG_20250501_100136.jpg IMG_20250501_100126.jpg IMG_202505...

Hi all, I recently had the enigne block from my 95 R100GS PD vapor blasted. I was in a bit of a hurry and had left the oil filter cover on and forgot to take it off after I got it back. When I opened it a few weeks later I found rust on the canister. I've ordered a new canister, but there's not alot...