Today in the shed you did...

Discuss all things 1970 & later Airheads right here.
Post Reply
User avatar
Airbear
Posts: 2887
Joined: Tue Aug 03, 2010 10:02 am
Location: Oz, lower right hand side, in a bit, just over the lumpy part.

Re: Today in the shed you did...

Post by Airbear »

Sputter
Charlie
and Brunhilde - 1974 R90/6
Image

Graduate, Wallace and Gromit School of Engineering and Design (Pending)
User avatar
SteveD
Posts: 4910
Joined: Tue Aug 03, 2010 3:29 am
Location: Melbourne, Oz.

Re: Today in the shed you did...

Post by SteveD »

enigmaT120 wrote:
bbelk wrote: My deck is bigger than my shop and my shop is bigger than my house. One must establish these priorities up front. After all, I built the house working out of the shop.
Yes! No use for a deck here though, with 9 months of rain per year. A porch would be nice but when I want to hang out I sit under the carport. Which is attached to the shop.
Why do you hang your deck out under the carport? We here in Oz do that under the lemon tree!
Cheers, Steve
Victoria, S.E.Oz.


1982 R100RSR100RS supergallery. https://boxerboy81.smugmug.com/R100RS
2006 K1200R.
1994 R1100GS.
timkil
Posts: 39
Joined: Fri Nov 22, 2013 5:03 pm

Re: Today in the shed you did...

Post by timkil »

Just playing with a new plasma cutter in my shed. Wait, does a 1000 sq. ft. basement count as a shed? It must, that's where my '83 r80 lives. All it wants is fluid changes, brakes and tires. Boringly reliable. The bad part about this shed is that it's only out of earshot when the dehumidifier, air compressor or stereo are cranked up. Yes dear, I heard you--not.
User avatar
jagarra
Posts: 896
Joined: Mon Dec 26, 2011 12:42 pm
Location: Reno, Nevada

Re: Today in the shed you did...

Post by jagarra »

Today in the garage, (aka Shed) I installed a new set of coils to my BMW. These are nice Bosch replacements, they are the same diameter as originals, but just a bit longer. Bosch part # 0221124001. Bike must like them, just touched the starter and she roared to life. Nice day, guess I will go for a ride just to see if they work.
1974 R90/6 built 9/73
1987 BMW K75S
1994 BMW R1100RS
1964 T100SR Triumph
1986 Honda XL600R
User avatar
SteveD
Posts: 4910
Joined: Tue Aug 03, 2010 3:29 am
Location: Melbourne, Oz.

Re: Today in the shed you did...

Post by SteveD »

jagarra wrote:Today in the garage, (aka Shed) I installed a new set of coils to my BMW. These are nice Bosch replacements, they are the same diameter as originals, but just a bit longer. Bosch part # 0221124001. Bike must like them, just touched the starter and she roared to life. Nice day, guess I will go for a ride just to see if they work.
jagarra, they might be the same size but I think they're heavier. The flimsy bracket can break if they're not otherwise supported, eg with a cable tie or something similar.
Cheers, Steve
Victoria, S.E.Oz.


1982 R100RSR100RS supergallery. https://boxerboy81.smugmug.com/R100RS
2006 K1200R.
1994 R1100GS.
ME 109
Posts: 7307
Joined: Tue Aug 03, 2010 3:00 am
Location: Albury, Australia

Re: Today in the shed you did...

Post by ME 109 »

SteveD wrote:
jagarra wrote:Today in the garage, (aka Shed) I installed a new set of coils to my BMW. These are nice Bosch replacements, they are the same diameter as originals, but just a bit longer. Bosch part # 0221124001. Bike must like them, just touched the starter and she roared to life. Nice day, guess I will go for a ride just to see if they work.
jagarra, they might be the same size but I think they're heavier. The flimsy bracket can break if they're not otherwise supported, eg with a cable tie or something similar.
My coils are supported with cable ties because the lh mount broke off the frame. Instant lights out when the bracket breaks and takes the ground with it.
Solution, mount ground to rh coil bracket and continue down the road.
Lord of the Bings
User avatar
jagarra
Posts: 896
Joined: Mon Dec 26, 2011 12:42 pm
Location: Reno, Nevada

Re: Today in the shed you did...

Post by jagarra »

Thanks for the heads up on the coil weight. I will put a tie strap or hose clamp around it. Of course, I just filled the tank.
1974 R90/6 built 9/73
1987 BMW K75S
1994 BMW R1100RS
1964 T100SR Triumph
1986 Honda XL600R
User avatar
bbelk
Posts: 1722
Joined: Wed Aug 04, 2010 2:13 pm

Re: Today in the shed you did...

Post by bbelk »

ME 109 wrote: My coils are supported with cable ties because the lh mount broke off the frame. Instant lights out when the bracket breaks and takes the ground with it.
Solution, mount ground to rh coil bracket and continue down the road.
For me it wasn't instant. The Tachometer bouncing around and pegging out was the first symptom. The headlight going on and off with the handlebar position was the second, followed by horn failure along with everything else. Multiple system failures led me to checking the grounds and I found the problem and used the same fix you did.
1975 R90/6
1979 R65
User avatar
bbelk
Posts: 1722
Joined: Wed Aug 04, 2010 2:13 pm

Re: Today in the shed you did...

Post by bbelk »

Today in the shop I attempted to bleed and fill the trim on my outboard motor. After much cursing and straining, I managed to drop it all the way down where is is stuck. There is a release on the hydraulics, which was open when I dropped it. The motor weighs slightly more than my R90. I think I need to draft some more muscle.
1975 R90/6
1979 R65
User avatar
Bamboo812
Posts: 1451
Joined: Mon Jan 06, 2014 4:45 pm

Re: Today in the shed you did...

Post by Bamboo812 »

Replaced the /6 rear wheel on my '72 R75/5 with a correct /5 wheel with chrome hubcap. While in there, swapped out leaking rear drive for rebuilt with new splines from Hansen's BMW in Oregon. Also fixed weakly blinking rear turn signals; ground wire in taillight had come loose.
Post Reply