Today in the shed you did...

Discuss all things 1970 & later Airheads right here.
User avatar
Airbear
Posts: 2886
Joined: Tue Aug 03, 2010 10:02 am
Location: Oz, lower right hand side, in a bit, just over the lumpy part.

Re: Today in the shed you did...

Post by Airbear »

SteveD wrote:My trans has the kicker. Of the 5 choices Charlie, from left to right, 1->5, which might be the one for my toolbox? #2 or #4?
#2 looks pretty good, and it appears from the shadows that they are not flat so you have added the extra bend that is useful for the kick start model. You should be good, working on the principle that if you have the tool you will never need it.

I plan to make a jig and churn out a bunch to spread around the community.
Charlie
and Brunhilde - 1974 R90/6
Image

Graduate, Wallace and Gromit School of Engineering and Design (Pending)
User avatar
SteveD
Posts: 4910
Joined: Tue Aug 03, 2010 3:29 am
Location: Melbourne, Oz.

Re: Today in the shed you did...

Post by SteveD »

Thanks Charlie
Cheers, Steve
Victoria, S.E.Oz.


1982 R100RSR100RS supergallery. https://boxerboy81.smugmug.com/R100RS
2006 K1200R.
1994 R1100GS.
User avatar
SteveD
Posts: 4910
Joined: Tue Aug 03, 2010 3:29 am
Location: Melbourne, Oz.

Re: Today in the shed you did...

Post by SteveD »

Today I started my bike and rode it to Grants shed. We did brake stuff on one of his bikes then I rode home to my shed and parked it. Bewdiful day, 25C, 161 miles and 15.75 litres.
Cheers, Steve
Victoria, S.E.Oz.


1982 R100RSR100RS supergallery. https://boxerboy81.smugmug.com/R100RS
2006 K1200R.
1994 R1100GS.
2valve
Posts: 233
Joined: Wed Aug 11, 2010 10:00 am
Location: Glen Innes Australia

Re: Today in the shed you did...

Post by 2valve »

Still not much happening in my shed at the moment but i did vacuum it out thou, does this still count.
User avatar
Ken in Oklahoma
Posts: 3182
Joined: Tue Aug 03, 2010 5:10 pm

Re: Today in the shed you did...

Post by Ken in Oklahoma »

2valve wrote:Still not much happening in my shed at the moment but i did vacuum it out thou, does this still count.
Yes, it counts a lot. It means you have started the process and are not committed to it.

Unless something else comes up.

Ken, been there done that in Oklahoma
____________________________________
There's no such thing as too many airheads
2valve
Posts: 233
Joined: Wed Aug 11, 2010 10:00 am
Location: Glen Innes Australia

Re: Today in the shed you did...

Post by 2valve »

Here's me thinking that i'm touched in the head department for vacuuming the shed out !. If all goes well most of the parts will land before x-mas then all of the fun begins, i'm so looking forward to it.
User avatar
SteveD
Posts: 4910
Joined: Tue Aug 03, 2010 3:29 am
Location: Melbourne, Oz.

Re: Today in the shed you did...

Post by SteveD »

2valve wrote:Still not much happening in my shed at the moment but i did vacuum it out thou, does this still count.

I used the blower-vac 'cause the wind blows leaves and shite inside. Then I washed my daughters 2002 Beetle whilst she went to the movies with the boss last night. I used the blower to dry it then polished the front half, cleaned the windscreen with soapy 0000 fine steel wool and now she can see thru it!
For motorcycle content, I pulled some big dead bugs from the fairing, cleaned the headlight glass with the 0000, tried to remove some dried adhesive from the tank and wondered when I'll reinstall the lowers.
Cheers, Steve
Victoria, S.E.Oz.


1982 R100RSR100RS supergallery. https://boxerboy81.smugmug.com/R100RS
2006 K1200R.
1994 R1100GS.
2valve
Posts: 233
Joined: Wed Aug 11, 2010 10:00 am
Location: Glen Innes Australia

Re: Today in the shed you did...

Post by 2valve »

Steve Mate your doing tooooo much you'll wear your self out.If you send that gorgeous BM that you own to me you would have more time to clean the v dub for the daughter.No need to thank me, i'm more than happy to help put. I was even tempted to give the BM a wax but i held back until the work is completed on it.
User avatar
SteveD
Posts: 4910
Joined: Tue Aug 03, 2010 3:29 am
Location: Melbourne, Oz.

Re: Today in the shed you did...

Post by SteveD »

Fire up the 90S and we can swap for a few weeks. ;)
Cheers, Steve
Victoria, S.E.Oz.


1982 R100RSR100RS supergallery. https://boxerboy81.smugmug.com/R100RS
2006 K1200R.
1994 R1100GS.
2valve
Posts: 233
Joined: Wed Aug 11, 2010 10:00 am
Location: Glen Innes Australia

Re: Today in the shed you did...

Post by 2valve »

Hi Steve
The poor old thing hasn't been outside the shed for years. I'd hate to see it get dirty with bugs all over it. That reminds me i'd better put the battery on charge.
Post Reply