After 40 years, the plastic knob that attaches to the turn signal switch on the left side handlebar broke and fell off. I still have the attaching screw. Before I fabricate something from JB Weld, does anyone have a spare switch knob from a dead turn signal switch?
Thanks!
Triangular Turn Signal Switch Knob, 1984 R100
-
Bill Smith
- Posts: 20
- Joined: Tue Oct 05, 2010 1:31 pm
Re: Triangular Turn Signal Switch Knob, 1984 R100
No, can't help, but is this a thing that can be 3D printed?
In the meantime, I'll check mine isn't loose!
In the meantime, I'll check mine isn't loose!
Cheers, Steve
Victoria, S.E.Oz.
1982 R100RSR100RS supergallery. https://boxerboy81.smugmug.com/R100RS
2006 K1200R.
1994 R1100GS.
Victoria, S.E.Oz.
1982 R100RSR100RS supergallery. https://boxerboy81.smugmug.com/R100RS
2006 K1200R.
1994 R1100GS.
-
Kurt in S.A.
- Posts: 1647
- Joined: Tue Aug 03, 2010 12:08 pm
Re: Triangular Turn Signal Switch Knob, 1984 R100
Maybe something could be modified from here?
https://www.mcmaster.com/products/knobs ... e~two-arm/
Kurt
https://www.mcmaster.com/products/knobs ... e~two-arm/
Kurt
-
Rob Frankham
- Posts: 1213
- Joined: Thu Aug 26, 2010 2:11 pm
- Location: Scotland UK, 20 miles from civilisation up a dead end road!
- Contact:
Re: Triangular Turn Signal Switch Knob, 1984 R100
FWIW, I do have a couple of spares and Would be happy to send one but I fear the postage from the UK to the US would be disproportionate. It would probably be better and cheaper if you could source one closer to home.
Rob
Rob