Sometimes it's hard to stop ...

Discuss all things 1970 & later Airheads right here.
She'llbe
Posts: 724
Joined: Tue Aug 03, 2010 6:48 pm

Re: Sometimes it's hard to stop ...

Post by She'llbe »

It was 28*C or 82*F yesterday in Nimbin. A great day to set up/tidy the tent for next months ride. Also changed all the vital fluids in the 90S.Now to give it a good tune and away I go. If you're not going to be studying for school you might as well tear the bike down and do something with it Charlie.
From the desk of the
Mt. Nardi Yacht Club
PO BOX 95
Nimbin, NSW
Australia 2480
02-6689-1234
Brad 77 100 7
Posts: 90
Joined: Thu Aug 05, 2010 9:05 pm

Re: Sometimes it's hard to stop ...

Post by Brad 77 100 7 »

Don't forget to change the air in the tires
The sooner you get behind, the more time you'll have to catch up.
Major Softie
Posts: 8900
Joined: Tue Aug 03, 2010 1:46 pm

Re: Sometimes it's hard to stop ...

Post by Major Softie »

Can you get the good German OEM air down there?
MS - out
ME 109
Posts: 7306
Joined: Tue Aug 03, 2010 3:00 am
Location: Albury, Australia

Re: Sometimes it's hard to stop ...

Post by ME 109 »

Major Softie wrote:Can you get the good German OEM air down there?
We can get s/hand Oompa band air. Not quite OEM but the bikes don't know it.

http://www.youtube.com/watch?v=I4UXs6zi ... detailpage
Lord of the Bings
Jean
Posts: 1100
Joined: Wed Aug 18, 2010 7:43 am

Re: Sometimes it's hard to stop ...

Post by Jean »

I thought it WAS Winter now down there(!) it is hotternhell here now.
And the toilet water goes the wrong way round...
Anyway, it's an Airhead. You should have it all back together in a week,yes?
Clemson, SC
R100s, R75/5
User avatar
Airbear
Posts: 2886
Joined: Tue Aug 03, 2010 10:02 am
Location: Oz, lower right hand side, in a bit, just over the lumpy part.

Re: Sometimes it's hard to stop ...

Post by Airbear »

Jean wrote: Anyway, it's an Airhead. You should have it all back together in a week,yes?
Yep, and I'm keen for that week to arrive, after the painting is done and everything is clean and the ordered parts have arrived and I've sorted the changes I want' to make to the wiring loom and ...

There is something that is going to be really easy to attend to now that the motor is out of the frame. That is the very floppy side stand. It's getting a new pin and a grease nipple. Maybe even the correct spring. Woo Hoo.
Charlie
and Brunhilde - 1974 R90/6
Image

Graduate, Wallace and Gromit School of Engineering and Design (Pending)
User avatar
Ross
Posts: 888
Joined: Tue Aug 03, 2010 10:16 pm
Location: Central Coast NSW Australia
Contact:

Re: Sometimes it's hard to stop ...

Post by Ross »

You didn't have this shed when I stayed at your place with Lilly and Helge???
Me wittle bit of the web........http://rossmz.blogspot.com/
User avatar
Airbear
Posts: 2886
Joined: Tue Aug 03, 2010 10:02 am
Location: Oz, lower right hand side, in a bit, just over the lumpy part.

Re: Sometimes it's hard to stop ...

Post by Airbear »

Ross wrote:You didn't have this shed when I stayed at your place with Lilly and Helge???
I certainly did, Ross. It's about 20 metres south of the house, in plain view of house and street.
The shed and the pile of junk near it are within an SEP Field**, so that would explain how you missed it.

** SEP = Somebody Else's Problem. I learnt about the usefulness of the concept from Douglas Adams. A multitude of uses around the home, workplace, significant relationship, planet, etc.
Charlie
and Brunhilde - 1974 R90/6
Image

Graduate, Wallace and Gromit School of Engineering and Design (Pending)
User avatar
Ross
Posts: 888
Joined: Tue Aug 03, 2010 10:16 pm
Location: Central Coast NSW Australia
Contact:

Re: Sometimes it's hard to stop ...

Post by Ross »

Airbear wrote:
Ross wrote:You didn't have this shed when I stayed at your place with Lilly and Helge???
I certainly did, Ross. It's about 20 metres south of the house, in plain view of house and street.
The shed and the pile of junk near it are within an SEP Field**, so that would explain how you missed it.

** SEP = Somebody Else's Problem. I learnt about the usefulness of the concept from Douglas Adams. A multitude of uses around the home, workplace, significant relationship, planet, etc.
Ok I do remember it now.
Me wittle bit of the web........http://rossmz.blogspot.com/
User avatar
Airbear
Posts: 2886
Joined: Tue Aug 03, 2010 10:02 am
Location: Oz, lower right hand side, in a bit, just over the lumpy part.

Re: Sometimes it's hard to stop ...

Post by Airbear »

Ross wrote: Ok I do remember it now.
Crikey, I'd better check the power supply to that SEP field generator.
I don't want the neighbours complaining about the pile of junk again.
Charlie
and Brunhilde - 1974 R90/6
Image

Graduate, Wallace and Gromit School of Engineering and Design (Pending)
Post Reply