Expresso front wheel rebuild

Discuss all things 1970 & later Airheads right here.
Mal S7
Posts: 661
Joined: Thu Aug 05, 2010 5:26 am

Re: D'ohhhhhh!

Post by Mal S7 »

with daylight burning
I decided to throw in some fork oil and go for a spin...

and so I grabbed a bottle and started pouring,
wow this Motul 5W is light,
runs in like water,
and smells hmmm like ....
brake
fluid .............
User avatar
DucatiPete
Posts: 257
Joined: Sun Aug 15, 2010 3:10 am

Re: Expresso front wheel rebuild

Post by DucatiPete »

you didn't!?
User avatar
Airbear
Posts: 2886
Joined: Tue Aug 03, 2010 10:02 am
Location: Oz, lower right hand side, in a bit, just over the lumpy part.

Re: Expresso front wheel rebuild

Post by Airbear »

As we are fond of saying down here in southern parts, "Shiddabrick".
There's always next weekend, Mal.
Charlie
and Brunhilde - 1974 R90/6
Image

Graduate, Wallace and Gromit School of Engineering and Design (Pending)
ME 109
Posts: 7306
Joined: Tue Aug 03, 2010 3:00 am
Location: Albury, Australia

Re: Expresso front wheel rebuild

Post by ME 109 »

Mal, moments like these forced me to come up with a saying for myself.

"The only thing that brings my brilliance undone is my baffling stupidity"

Not saying that is applicable here tho' :mrgreen:
Lord of the Bings
User avatar
SteveD
Posts: 4909
Joined: Tue Aug 03, 2010 3:29 am
Location: Melbourne, Oz.

Re: D'ohhhhhh!

Post by SteveD »

Mal S7 wrote:with daylight burning
I decided to throw in some fork oil and go for a spin...

and so I grabbed a bottle and started pouring,
wow this Motul 5W is light,
runs in like water,
and smells hmmm like ....
brake
fluid .............
Hmmm there was a gust of a turbulent northerly around then! How loud did you swear?!
Cheers, Steve
Victoria, S.E.Oz.


1982 R100RSR100RS supergallery. https://boxerboy81.smugmug.com/R100RS
2006 K1200R.
1994 R1100GS.
Mal S7
Posts: 661
Joined: Thu Aug 05, 2010 5:26 am

Re: Expresso front wheel rebuild

Post by Mal S7 »

Yeah 'ken oath did I swear! Sudden scary thought:- the dumbest thing I ever did, might yet to be. :shock:

Best to try and get that over and done with huh.
ME 109
Posts: 7306
Joined: Tue Aug 03, 2010 3:00 am
Location: Albury, Australia

Re: Expresso front wheel rebuild

Post by ME 109 »

Always make the most out of a situation tho' Mal.

You may be able to balance your carbs with your forks.
A bit like tuning forks really.
Lord of the Bings
User avatar
George Ryals
Posts: 510
Joined: Tue Aug 03, 2010 10:22 am
Location: Stone Mountain, GA

Re: Expresso front wheel rebuild

Post by George Ryals »

So how did it ride? Just consider this a test of very light oil in your forks. What can it hurt?
Smile it's contagious!
'74 R90S, '67 /2 Conv w/sc, '66 R50/2
'74 Harley FXE, '72 Harley FLH w/HD sc
'69 BSA 441 Victor Special, '74 R90/6 Basket case
'85 R80RT wreck for parts
Mal S7
Posts: 661
Joined: Thu Aug 05, 2010 5:26 am

Re: Expresso front wheel rebuild

Post by Mal S7 »

George Ryals wrote:So how did it ride? Just consider this a test of very light oil in your forks. What can it hurt?
Thanks for making me feel better George. Fork-oil in the brakes, on the other hand ......

I drained the legs. Now struggling to replace the stripped damper nipple. I have spare damper rods,... but can't get the nipples to undo, even with heat. This was meant to proceed quickly ....
User avatar
DucatiPete
Posts: 257
Joined: Sun Aug 15, 2010 3:10 am

Re: Expresso front wheel rebuild

Post by DucatiPete »

yeah, drain and replace 'should' be a pretty straight forward procedure (w no lasting negative consequences)... when we did my mate's 100s forks we had an issue w a broken nipple - freakin' PITA! i hear the fireman has 'heaps' of 'em - might be a quicker/cheaper alternative source.
good luck!
Post Reply