Boxerworks.com

Thanks Stevey and Kurt its was the plug at the back, its all good now.

Its a 77 r100/7

Today i have changed my voltage regulator to a new electronic one from motobins, changed clutch cable and replaced rubber boot over tacho cable at gearbox.

When i turned the key to start it no lights on the dash, it starts and goes fine just no dashlights

Any ideas,
Thanks Bob

Is that all grain brweing Airbear?

Yes it does have a boyer ignition.

Hi Airbear, sorry for the late reply. Yes i have checked the wiring with the diagrams in my haynes manual and i also took a picture of the wiring on the ingnition before i moved it from the RS fairing to the headlight. Its the same as before i moved it. The bike is a 77 r100/7 but at some stage has ...

Hi after removing my RS fairingand fitting S bars ( soon S fairing) and moving the Key ignition to left side of headlight. After riding it i turn the key off ( has no kill switch) and the bike doesnt turn off, the dash lights just dim a little. I then stall the bike if i restart it with out giving a...

Thanks fellas for the links to read and for yr info Me 109. Today i started from the beginning with everything loosened and tightened everything back up,following the assembly steps in the fork alignment article and torquing the top nuts using some angle iron for the torque relief bar. It seems ok n...

Ok, i more stupid question. Whats a torque relief bar?

Hi, i have just replaced my RS fairing with an S fairing and s Bars. I dropped the forks down by taking wheel and front guard off and slid each fork leg down to mount new head light ears. After putting everything back together and taking it for a test ride, It has this weird scary sway or wobble to ...