Tire to swing arm clearance

Discuss all things 1970 & later Airheads right here.
User avatar
melville
Posts: 1815
Joined: Tue Aug 03, 2010 8:32 am

Re: Tire to swing arm clearance

Post by melville »

Image

Yep, tire time chez melville also. 8,113 miles is a few too many for a Pilot Active.

Skinny (4.00-18) and no spacer.
Call me Mel. Some years ago- never mind how long precisely- having little or no money in my purse, and nothing particular to interest me at home, I thought I would ride about a little and see the other parts of the world.
robert
Posts: 471
Joined: Sun Jan 30, 2011 4:03 pm

Re: Tire to swing arm clearance

Post by robert »

That tire should have been shit canned about 4000mi ago.
ME 109
Posts: 7307
Joined: Tue Aug 03, 2010 3:00 am
Location: Albury, Australia

Re: Tire to swing arm clearance

Post by ME 109 »

Zombie Master wrote: Wed Jun 06, 2018 8:36 pm
ME 109 wrote: Wed Jun 06, 2018 4:20 pm
Skinny tyres rule, and the skinnier the tyre, the more the sports bikes squirm when they get a view of it.
This..... is a very important consideration! Embarrassing modern sport bikes is a noble pursuit. :P

Other than exchanging the top hat spacer, are there any other adjustments required?
No other requirements, but you should have either side of 1mm clearance between wheel hub and fd face.
You would have maybe three plus mm clearance there with the longer spacer?
Lord of the Bings
User avatar
Zombie Master
Posts: 8821
Joined: Sun Aug 22, 2010 12:21 am
Location: Vancouver Island BC Canada

Re: Tire to swing arm clearance

Post by Zombie Master »

ME 109 wrote: Thu Jun 07, 2018 3:55 am
Zombie Master wrote: Wed Jun 06, 2018 8:36 pm
ME 109 wrote: Wed Jun 06, 2018 4:20 pm
Skinny tyres rule, and the skinnier the tyre, the more the sports bikes squirm when they get a view of it.
This..... is a very important consideration! Embarrassing modern sport bikes is a noble pursuit. :P

Other than exchanging the top hat spacer, are there any other adjustments required?
No other requirements, but you should have either side of 1mm clearance between wheel hub and fd face.
You would have maybe three plus mm clearance there with the longer spacer?
What's the fd?
Any and all disclaimers may apply
barryh
Posts: 730
Joined: Fri Oct 01, 2010 12:30 pm

Re: Tire to swing arm clearance

Post by barryh »

Final drive.

When the longer spacer is fitted the gap between the right hand edge of the wheel/brake hub and final drive increases to approx. 3mm
barry
Cheshire
England
User avatar
Zombie Master
Posts: 8821
Joined: Sun Aug 22, 2010 12:21 am
Location: Vancouver Island BC Canada

Re: Tire to swing arm clearance

Post by Zombie Master »

barryh wrote: Thu Jun 07, 2018 2:13 pm Final drive.

When the longer spacer is fitted the gap between the right hand edge of the wheel/brake hub and final drive increases to approx. 3mm
Thanx! Mine measures 2.79 mm. Is that acceptable? Tire doesn't rub but is close.
Any and all disclaimers may apply
barryh
Posts: 730
Joined: Fri Oct 01, 2010 12:30 pm

Re: Tire to swing arm clearance

Post by barryh »

Zombie Master wrote: Fri Jun 08, 2018 3:55 am
barryh wrote: Thu Jun 07, 2018 2:13 pm Final drive.

When the longer spacer is fitted the gap between the right hand edge of the wheel/brake hub and final drive increases to approx. 3mm
Thanx! Mine measures 2.79 mm. Is that acceptable? Tire doesn't rub but is close.
2.79 mm is fine. There's a lip which you can see through the 2.79 mm gap so it's not as if the brake hub is open to the elements.
barry
Cheshire
England
Wobbly
Posts: 300
Joined: Mon Aug 07, 2017 8:48 pm

Re: Tire to swing arm clearance

Post by Wobbly »

So what size tire are we talking ? I'm running 120/90-18 Bridgestones with no shim. They handle great and I don't feel the need for bigger rear at all.
After 20 years as a professional bike mechanic and 30 years as an engineer I know just enough to be dangerous !
Post Reply