Hi fellows, I'm in the process of stripping my /7 and have found the horn mounting brackets broken on both sides of the frame. They look like a vibration related stress fracture.
Has anyone else seen similar damage on their frames?
I'll make new tags a little stronger and weld them in place when I strip and blast the frame, i'm just interested to know if it is normal damage, that is all.
cheers, Sam
Broken Horn Mounting Brackets
Broken Horn Mounting Brackets
Why is the rum always gone? - Capt. J. Sparrow.
Re: Broken Horn Mounting Brackets
Gidday Sam, I can't remember the fine print, but there's method in the madness with the horn brackets.
Two thin strips isn't it?
It helps with the sound of the horn apparently.
Going to a thicker strip (like 3mm) will affect sound.
Two thin strips isn't it?
It helps with the sound of the horn apparently.
Going to a thicker strip (like 3mm) will affect sound.
Lord of the Bings
Re: Broken Horn Mounting Brackets
Similar experience with the horn brackets on my '82 R100 some years ago. I fabricated new ones from thicker stock. Don't remember if there was a change in the sound of the horns or not.
-
- Posts: 6008
- Joined: Thu Aug 12, 2010 12:39 pm
- Location: Galt California
- Contact:
Re: Broken Horn Mounting Brackets
I just removed a horn from a 1974 R90/6 yesterday in preparation for shipping it out. Yes, it had two thin springy strips of metal for vibration.
Guess it will go on eBay along with all the rest.
Guess it will go on eBay along with all the rest.
Ask the Indians what happens when you don't control immigration.
Re: Broken Horn Mounting Brackets
Definitely normal. Unfortunately too.
After about 10,000 miles of a complete restoration of my R100S, one of the horn brackets broke.
After about 10,000 miles of a complete restoration of my R100S, one of the horn brackets broke.
www.beemersandbits.com
'77 R100S - http://www.joshuawithers.com/r100s
'73 /5 Toaster Cafe bike http://www.joshwithers.com/slash5
'67 Bridgestone 175 Hurricane Scrambler
'66 R60/2
'72 BMW 2002
Instagram - jj_withers
'77 R100S - http://www.joshuawithers.com/r100s
'73 /5 Toaster Cafe bike http://www.joshwithers.com/slash5
'67 Bridgestone 175 Hurricane Scrambler
'66 R60/2
'72 BMW 2002
Instagram - jj_withers
-
- Posts: 129
- Joined: Fri Sep 03, 2010 6:37 pm
-
- Posts: 8900
- Joined: Tue Aug 03, 2010 1:46 pm
Re: Broken Horn Mounting Brackets
Makes people think they've just tried to lane change right through a Cadillac.ME 109 wrote:Nuttin like twin oe fiamms
MS - out
Re: Broken Horn Mounting Brackets
ME 109 wrote:Nuttin like twin oe fiamms
OP - are you talking about two brackets on the outside of each leg of the main frame?
I remember seeing those in ads and in the showroom before I bought my R65. I was really disappointed in the single disk-type horn.
So I fixed it.
Anyway, those side horn mounts may be similar to the coil mounts on the early R65 - that being a 'U' shaped bracket welded to the main frame. On the R65 the coils were mounted to them, along with the main ground on the front coil. When the coil mount eventually broke (those that got ridden broke) it removed the ground connector from the circuit!
Anyway, that is what I think the OP is talking about. In which case, you will need to fab some new brackets and weld them to the frame - or do something entirely different...
Re: Broken Horn Mounting Brackets
Got my twin Fiamms at Auto Zone. Mounted 'em up on the '81 R65 just like 'oneoftheRobguys' using two thin straps for each horn. The Major is correct about dualies...
Them muthas are loud. Best function is with a horn relay added to the wiring harness.
Them muthas are loud. Best function is with a horn relay added to the wiring harness.
1981 R65
1983 R65
1978 R100S
1995 Triumph Trophy
1983 R65
1978 R100S
1995 Triumph Trophy