Chuey wrote:He may be a bit cowardly (on behalf of his countryman) but at least he's got a picture of the cure for cowardice on his posts.
Chuey
Beer Chuey?
I wouldn't weld up my tranny.
Chuey wrote:He may be a bit cowardly (on behalf of his countryman) but at least he's got a picture of the cure for cowardice on his posts.
Chuey
A good used box is OZ$800+ here! If you can find one and then how do you know it's good?Duane Ausherman wrote:It has been done, but it takes somebody who really knows what they are doing. The reason that the dogs break off is that the dogs weren't indexed well when new. Most/all of the energy goes through two dogs and the rest don't touch. Then comes the heat treating. Oh, yes, the shifter plate with the holes for the dogs also must be indexed and heat treated too.
Just go find a good used box. Unless you want a project.
Is anybody remembering how many times I have suggested to have a good spare box sitting on the shelf? Unless you don't mind some down time.
Yes, funny you should ask. You've done it 29 and 1/2 times, counting this one.Duane Ausherman wrote:. . . Is anybody remembering how many times I have suggested to have a good spare box sitting on the shelf? Unless you don't mind some down time.
Ken, to (probably) misquote Joseph Heller, you can't have enjoyed them, or you wouldn't have counted.Ken in Oklahoma wrote:Yes, funny you should ask. You've done it 29 and 1/2 times, counting this one.Duane Ausherman wrote:. . . Is anybody remembering how many times I have suggested to have a good spare box sitting on the shelf? Unless you don't mind some down time.
* That 1/2 time? You seemed to be headed that way, but apparently lost your train of thought.
Ken
Airbear wrote: . . . Ken, to (probably) misquote Joseph Heller, you can't have enjoyed them, or you wouldn't have counted.
George has asked me to thank you all for the advice offered. . . .