Thanks to SteveD in Melbourne, Oz

timkil · Post by **timkil** » Sun Feb 23, 2014 9:00 pm

SteveD, I used the caliper up brake fluid injection method you described in one of your posts after I installed new handlebars and brake lines. I had a totally empty system and it worked a treat. Filled the left side first then listened to the bubbles as I did the right side. Good firm lever and not a bubble in sight on the first try. Thanks

Post by **dwerbil** » Sun Feb 23, 2014 9:03 pm

Does this place rock or what!

ME 109 · Post by **ME 109** » Sun Feb 23, 2014 11:21 pm

dwerbil wrote:Does this place rock or what!

Steve's the 'brake man'.

I'll be looking up his great caliper rebuild thread before long.

Primate · Post by **Primate** » Mon Feb 24, 2014 12:26 am

timkil wrote:SteveD, I used the caliper up brake fluid injection method you described in one of your posts after I installed new handlebars and brake lines. I had a totally empty system and it worked a treat. Filled the left side first then listened to the bubbles as I did the right side. Good firm lever and not a bubble in sight on the first try. Thanks

I effed it up the first few times I tried it, but now that I get it

, it's a great method.

SteveD · Post by **SteveD** » Mon Feb 24, 2014 5:22 am

Cool. Glad it did the job.

timkil · Post by **timkil** » Mon Feb 24, 2014 7:17 pm

I should also say thanks to Moosehead for the brake line information. You guys rock and roll.

Boxerworks.com

Thanks to SteveD in Melbourne, Oz

Thanks to SteveD in Melbourne, Oz

Re: Thanks to SteveD in Melbourne, Oz

Re: Thanks to SteveD in Melbourne, Oz

Re: Thanks to SteveD in Melbourne, Oz

Re: Thanks to SteveD in Melbourne, Oz

Re: Thanks to SteveD in Melbourne, Oz